780-438-3493

9419 27 Ave NW, Edmonton, AB T6N 1C9, Canada

WPT winch design

Most winches conform to U.S. SAE J706 STANDARD. 6.1 Maximum Rated Line Pull-Maximum rated line pull will be established as follows: 6.1.1 A load equal to twice the desired maximum rated line pull will be applied to the drum on the first layer at an effective distance form one flange of no more than five times the maximum recommended wire rope diameter. This load will be maintained while the winch is powered for at least one drum revolution at half of rated line speed. The direction of pull will be on a horizontal within ±15 degrees and perpendicular to the centerline of the winch drum within ±5 degrees. The test will then be repeated with a load equal to the desired rated line pull. Both tests will then be repeated on the opposite end of drum. From SAE J 706


Professional test and verify

WPT built a winch testing center at WPT POWER (Shanghai) Ltd. to verify our winch performance. The center simulates a real life application situation. It provides an excellent testing platform to ensure product quality, new product development, product improvement and quality customized design. Max test line pull :1,600KN (359,700Lbs). The height of tower: 16M (52 Feet). Effective enhance: 8M(26 Feet) Hydraulic power center: 100KW .Highest pressure: 25MPA (3626 Psi) .Transmission gear box efficienty testing standard: Maximum output torque:26000NM (19175 Llbf-ft) . Maximum input power: 90KW .



Worm Gear Electric Winches


  • Easy Install with 12 or 24 volt DC connection
  • Robust Worm gear design that holds the load even if the power fails or is interrupted
  • Lever styled clutch allows cable to be unspooled rapidly
  • A rugged cast ductile steel drum that withstands high impact loads and cable wear
  • Cast aluminium and clutch housing and cover making it extremely strong and lightweight




Planetary Hydraulic Winches


  • Efficient Single Stage Planetary Design
  • Multiple disc brake is spring-applied and hydraulically released
  • Spring-loaded clutch design disengages for free spooling
  • Available with manual or air shift operation
  • conforms to SAE J706 standard



Planetary Hydraulic Hoists


  • Efficient Two Stage Planetary Design
  • Multiple disc brake is spring-applied and hydraulically released
  • Easily serviced compact design


8,000 lb Planetary Hydraulic Hoist

12,000 lb Planetary Hydraulic Hoist

Winches


WPT Winches

Winch Accessories


  • Fairleads (12,000 lbs - 55,000 lbs)
  • Cable Tensioners




Worm Gear Hydraulic Winches


  • Robust Worm gear design that holds the load even if the power fails or is interrupted
  • Lever styled clutch allows cable to be unspooled rapidly
  • A rugged cast ductile steel drum that withstands high impact loads and cable wear
  • Cast aluminium and clutch housing and cover making it extremely strong and lightweight
  • conforms to SAE J706 standard